Sliger CX4170i, 4U 17in Rackmount Server Case – 5.25″ Bay and 360mm AIO Support
299,00 €
4U 17in, ATX PSU, ATX/EATX Motherboard, 360mm AIO Support, 1x 5.25″ bay
2 in stock
Sliger CX4170i 4U rackmount chassis with 17″ depth
- support for SSI-CEB, EATX, ATX, Flex-ATX, and Micro-ATX motherboards
- 8x full-height PCIe card slots
- 1x 5.25″ bay and up to 3x 3.5″ HDDs or 8x 2.5″ SSD
- 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O
- supports up to 3x 120mm fans (available separately)
- Liquid cooling support for 360mm, 240mm or 2x 120mm AIOs
- up to 153mm tall CPU air coolers
- ATX power supply support
NOTE: AIO Liquid cooling or fans not included and are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.
Specifications
| Motherboard support | XL-ATX (325mm x 330mm) SSI-EEB (L x W: 305 x 330mm) SSI-CEB (L x W: 305 x 267mm) EATX (L x W: 305 x 330mm) ATX (L x W: 305 x 244mm) Micro-ATX (L x W: 245 x 245mm) Flex-ATX (L x W: 229 x 191mm) Mini-DTX (L x W: 203 x 170mm) Mini-ITX (L x W: 170 x 170mm) |
| CPU Liquid Cooling | Single Radiator Options
(Asetek Partner AIOs, EKWB AIOs, and Arctic brand AIOs are supported) 1x 360mm liquid coolers or 1x 240mm liquid cooler or 3x 120mm liquid coolers A complete list of compatible Asetek Partner AIO coolers is available here: Asetek Partner AIOs (EVGA, MSI, NZXT, Asus, Razer, etc.) ATTENTION: Please check your radiator or AIO compatibility before purchasing! These cases are designed around specific Asetek AIO radiator sizes with round edges. Radiators with square design and sharp edges are incompatible. |
| CPU Air Coolers | up to 153mm tall
Recommended Silent Air Coolers: |
| Fan Mounting | Front:
up to 3x 120mm x 25mm fans (available separately) |
| GPU / PCIe Cards | 8x full height PCIe card slot cutouts
LIQUID COOLING NOTE: radiators reduce the available depth inside the case for long GPUs
|
| Storage | Internal mounting bracket with configuration options for:
3x 3.5″ HDD or 8x 2.5″ SSD or 2x 3.5″ HDD and 3x 2.5″ SSD or 1x 3.5″ HDD and 5x 2.5″ SSD |
| Power Supply | ATX
|
| Front Panel I/O | 2x USB 3.0 Type A to 19-Pin Motherboard Header + 1x USB 3.1 Type C 10Gbps to type-E header |
| Material and Finish | galvanized steel + aluminium, powder coating |
| Case Dimensions (DxWxH) | 429mm x 432mm x 176,75mm |
| Compatible Rack Rails | Sliger PM-Series Ball Bearing Slides
Recommended lengths:
General Devices C300-S Series |
| Rev Control | 18.04.2022 – 1.0 Initial release |
| Scope of delivery | Computer case, mounting hardware, 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O connectors |
| Documents and build recommendations | coming soon |
More details can be found on manufacturer’s website.
| Weight | 13 kg |
|---|---|
| Dimensions | 42,9 × 43,2 × 17,68 cm |
