Description
Sliger CX3171a XL 3U rackmount chassis with 17″ depth
- support for SSI-EEB, SSI-CEB, eATX, and XL ATX motherboards up to 13″ in depth
- 1x PCIe card slot + 3.5-slot PCIe card via 1x PCIe 4.0 x16 riser for over-sized GPUs
- 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O
- liquid cooling support for a 360mm AIO with up to 3x 120mm fans in push/pull
- support for up to 3x 3.5″ HDDs, 8x 2.5″ SSDs, or a combination of both
- up to 110mm tall CPU air coolers
- SFX/SFX-L power supply support
NOTE: AIO Liquid cooling or fans not included and are available for purchase separately depending on your needs. Check our Cooling and Ventilation section.
Specifications
| Motherboard support | XL-ATX (325mm x 330mm) SSI-EEB (305mm x 330mm) eATX (305mm x 267mm) SSI-CEB (305mm x 267mm) ATX (L x W: 305 x 244mm) Micro-ATX (L x W: 245 x 245mm) Flex-ATX (L x W: 229 x 191mm) Mini-DTX (L x W: 203 x 170mm) Mini-ITX (L x W: 170 x 170mm) |
| CPU Liquid Cooling | Single Radiator Options
(Asetek Partner AIOs, EKWB AIOs, and Arctic brand AIOs are supported) 1x 360mm liquid coolers or 1x 240mm liquid cooler or 2x 120mm liquid coolers (AIOs on left fan and right fan position, middle fan is air only) A complete list of compatible Asetek Partner AIO coolers is available here: Asetek Partner AIOs (EVGA, MSI, NZXT, Asus, Razer, etc.) ATTENTION: Please check your radiator or AIO compatibility before purchasing! These cases are designed around specific Asetek AIO radiator sizes with round edges. Radiators with square design and sharp edges are often incompatible. |
| CPU Air Coolers | up to 110mm tall
Recommended Silent Air Coolers: Noctua NH-D9L |
| Fan Mounting | Front:
up to 3x 120mm x 25mm fans (available separately) |
| GPU / PCIe Cards | 1x horizontal 3-slot GPU cutout with PCIe 16x Gen 4.0 riser cable
1x standard vertical full-height PCIe card slot cutout
|
| Storage | 1x 2.5″ SSD on the rear panel next to SFX power supply
Internal mounting bracket with support for up to 3x 3.5″ HDDs, 8x 2.5″ SSDs, or a combination of both |
| Power Supply | SFX or SFX-L |
| Front Panel I/O | 2x USB 3.0 Type A to 19-Pin Motherboard Header + 1x USB 3.1 Type C 10Gbps to type-E header |
| Material and Finish | galvanized steel + aluminium, powder coating |
| Case Dimensions (DxWxH) | 433mm x 432mm x 132.5mm |
| Compatible Rack Rails | Sliger PM-Series Ball Bearing Slides |
| Rev Control | 18.04.2022 – 1.0 Initial release |
| Scope of delivery | Computer case, mounting hardware, 2x USB 3.0 type A + 1x USB type C 10Gbps front I/O connectors |
| Documents and build recommendations | coming soon |
More details can be found on manufacturer’s website.
